113
FAX FUNCTIONS
FORWARDING RECEIVED DATA TO
A NETWORK ADDRESS (INBOUND
ROUTING SETTINGS)
You can have received faxes automatically forwarded to a specified shared folder. As an example, this function can
be used to route received faxes to a specified folder without printing the faxes.
All Inbound Routing settings are configured in the Web page.
The following explanation assumes that the Web page has been accessed with administrator rights.
For the procedure for accessing the Web pages, see "ABOUT THE WEB PAGES" (p.190).
To activate Inbound Routing, configure the basic settings before specifying the destination.
In the menu frame, click [Inbound Routing Settings]. Click the [Submit] button after
settings
CONFIGURING THE BASIC SETTINGS
Configure the basic settings of Inbound Routing.
Enabling the Inbound Routing function
Select [Enable] in [Inbound Routing].
Changing the print style of received data
Select a print style in [Print Style Setting].
Item Settings Description
Inbound Routing Enable, Disable Enable or disable the Inbound Routing function.
Print Style Setting Always Print, Print at Error Select a print style of received data.
To Next Page
Loading...
Need help?
General
