137
SCANNER FUNCTIONS
Scanner driver settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the
"Preview screen", which shows the scanned image. For details on the scan settings, click the "Help" button in the
preview screen to display Help.
(1) "Scanning Position" menu
("Scanning Source" in some regions)
Select the location where the original is placed.
Selections are "Platen" (document glass), "SPF
(Simplex)", "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)".
"SCANNING FROM A TWAIN-COMPLIANT
APPLICATION" (p.135)
(2) "Scanning Mode" menu
Select "Preset" or "Custom Settings" ("Standard"
or "Professional" in some regions) for the scanning
mode.
The "Preset (or Standard)" screen lets you select
the original type as well as monitor, photo, fax, or
OCR according to the purpose of scanning.
If you wish to change the default settings for these
four buttons, or select custom settings such as the
image type and resolution before scanning, switch
to the "Custom Settings (or Professional)" screen.
For details on the settings, click the "Help" button
in the preview screen to display Help.
(3) "Image Area" menu
Set the scanning area. To scan the original size
detected by the machine, select "Auto".
The scanning area can also be specified as
desired in the preview window.
(4) "Zoom Preview" checkbox
When this is selected, the selected part of the
preview image will be enlarged when the "Preview"
button is clicked.
To return to the regular view, remove the
checkmark.
(5) "Preview" button
Previews the document.
(6) "Scan" button
("Scanning" in some regions)
Click to scan an original using the selected
settings. Before clicking the "Scan" button, make
sure the settings are correct.
(7) "Close" button
Click to close the scanner driver setup screen.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Set-up screen
On machines without an document feeder,
this setting is fixed at "Platen".
Note
[Zoom Preview] cannot be used when [SPF]
is selected in the "Scanning Position" menu.
If [Preview] is canceled by immediately
pressing the [Esc] key on your keyboard,
nothing will appear in the preview screen.
To cancel a scanning job after the "Scan"
button is clicked, press the [Esc] key on your
keyboard.
Note
Note
Note
To Next Page
Loading...
Need help?
General
