155
TROUBLESHOOTING
MISFEED IN THE BYPASS TRAY
1
Remove any paper remaining in the bypass tray.
2
Gently remove the misfed paper from the bypass tray.
3
Close the auxiliary tray and then the
bypass tray, grasp the side cover
open/close handle, and gently open
and close the side cover.
The message " Clear paper path." will be
cleared and copying will be possible.
3
Grasp the side cover open/close
handle and gently open the side
cover.
4
Turn the paper feed knob and feed out
the paper that is inside. ("Misfeed in
the paper feed area A" (p.156))
5
Close the side cover.
The message " Clear paper path." will be
cleared and copying will be possible.
If you were able to remove the misfed paper
(1)
(2)
If you are unable to remove the misfed paper
To Next Page
Loading...
Need help?
General
