139
SCANNER FUNCTIONS
USB MEMORY SCAN
USING THE USB MEMORY SCAN FUNCTION
A scanned image can be sent (save) to a commercially available USB memory device that has been connected to
the machine.
1
Make sure the machine is in scan mode.
When the SCAN indicator is lit, the machine is in scan mode. If the indicator is not lit, press the [SCAN] key.
If auditing mode has been enabled for the scan function in the system settings, a message will appear
prompting you to enter your account number when you switch to scan mode. Enter your account number (five
digits) with the numeric keys. (p.178)
2
Place the original(s) in the document feeder tray or on the document glass.
For detailed information on placing an original, see "PLACING THE ORIGINAL" (p.27).
If you are using the document glass to send multiple pages, place the first page first.
3
Press the [ADDRESS] key.
4
Select "USB Memory Scan" using the [ ] key, press the [OK] key.
You cannot place originals in both the document feeder tray and on the document glass and send them in a
single transmission.
Note
To Next Page
Loading...
Need help?
General
