17
BEFORE USING THE MACHINE
PRINT SIDE FACE UP OR FACE DOWN
Paper is loaded with the print side face up or face down depending on the paper type and tray.
The loading orientation of punched paper, letterhead paper, and pre-printed paper differs from that of other paper.
For details, see "Example: Placement orientations of punched paper, letter head paper, and pre-printed paper" (p.17).
Trays 1 to 2
Load the paper with the print side face up.
However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face down.
Bypass tray
Load the paper with the print side face down.
However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face up.
Example: Placement orientations of punched paper, letter head paper, and pre-printed paper
Document feeder tray Original glass
A
A
Pre-punched (Left binding) Letter head Pre-printed
Tray 1 to 2
Load the paper print side
down with the punch holes to
the front and the top edge to
the right.
Load the paper print side
down with the letter head (top
edge) to the right.
Load the paper print side
(pre-printed side) down with
the top edge to the right.
Bypass tray
Load the paper print side up
with the punch holes to the
front and the top edge to the
left.
Load the paper print side up
with the letter head (top edge)
to the left.
Load the paper print side
(pre-printed side) up with the
top edge to the left.
A
ABC
ABC
A
-1-
A
-1-
A
ABC
ABC
A
A
-1-
A
-1-
To Next Page
Loading...
Need help?
General
