Sharp MX-M264N Installation Manual

MX-M264U IC card reader 24 – 3
Holder type C
Y591-EHID-201 v01
(No reference position)
4) Attach the IC card reader holder to the operation panel of the
machine.
5) Bind up the cables of the card reader.
NOTE: Cable length is differs depending on type of card
reader, bind up the cable followed by the following
instructions.
Adjust the bind length of card reader cable and bind up it with
banding band.
Fix the banding band by inserting the lock part of it into the
hole in the frame.
Connect the USB mini harness to the card reader cable.
C. Attach the operation panel
D. Connect the connector of the IC card reader to
the connector of the machine
E. Turn ON the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
Fix with a screw.
2
2
1
2

Sharp MX-M264N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Standard Paper Capacity	1100 sheets
Max Paper Capacity	2100 sheets
Automatic Duplexing	Yes
ADF Capacity	100 sheets
Scan Resolution	600 x 600 dpi
Copy Speed	26 cpm
Copy Resolution	600 x 600 dpi
Connectivity	Ethernet, USB