Sharp PC-1600

-
PC-l600
Pin
Symbol
ln/Out
Active
Function
No.
level
42 RESET
In
low
IC reset pin. A low on this line disables all the functions of the IC.
43 P5V ln/Out
-
Parallel mode signal which is fixed to GND.
When CDS is "1," it serves as a I-bit output port.
When CDS is "0," it serves as a supply voltage input of the external device.
44 PE
ln/Out
-
Parallel mode paper end signal.
When CDS is "1," it serves as a I-bit outpur port.
When CDS is "0," it receives the paper end signal from the external device.
-_ .. -
--- --- --- ------ -------