For portable and outdoor use, the supplied BT-75 battery pack is ideal. Indoors, the supplied AA-75X AC Adaptor/
Battery Charger and 2m DC OUT cable will be more useful. For extended outdoor use, the optional
V/R-P75CH
Car Battery Adaptor/Charger may come in handy in remote locations.
Using the AC Adaptor/Battery Charger
OPERATE
lamp
(red)
tights to indicate the power is on.
Battery Pack holder
L
Use the suppIled 2m DC OUT cable to
power the Camcorder from the
malns.
CHARGE lamp (yellow)
Lights when a battery pack IS
betng
charged.
The lamp goes off when the battery pack IS
charged or removed.
m
.
-
The optional
SHARP
VRP75CH
Car Battery Adaptor/Charger
is like the AA-75X, but operates from a car battery.
Precautions:
@The
AC Adaptor/Battery Charger, if used near a radio,
may cause interference.
l Prevent flammables, liquids or metal objects from enter-
.
ing the unit.
*The
AA-75X is a sealed unit. Do not attempt to open or
modify it.
l
Do
not damage or drop the unit or subject it to vibrations.
l Do not leave the unit in direct sunlight.
l
Avoid using the unit in humid or extremely hot places.
USING THE AC ADAPTOR/BATTERY CHARGER
Use the supplied AA-75X
AC
Adaptor/Battery Charger and DC OUT
cable.
1
Connect the DC OUT cable to the AC Adaptor
and Camcorder.
2
Insert the AC plug into a wall outlet. The
OPERATE lamp on the AC Adaptor will light up.
DC OUT cable
m
The AA-75X AC Adaptor/Battery Charger will not supply power to the Camcorder through the DC OUT cable while
charging a battery pack.
11