FORWARD/REVERSE SEARCH AND STILL
To quickly locate a point on a recorded tape, use the Forward and Reverse Search buttons.
Forward Search
Press the FF(
@I)
button during playback. This
speeds playback up to 3 times faster than normal for
an SP recorded tape and 7 times faster for an LP
recorded tape.
Reverse Search
Press the REW(
@I)
button during playback. This
speeds up reverse playback to 3 times faster than
normal for an SP recorded tape and 7 times faster
for an LP recorded tape.
Em
.
-
There may be some picture noise during Forward/Reverse Search. This is normal. If the TV picture roils vertically, adjust
the TV vertical hold control. The picture may go monochrome during Forward/Reverse Search on a recorded tape. This
is normal. Audio will not be heard.
Still
Press the PAUSE/STILL
the picture. To resume
STILL button again.
button during playback to still
playback, press the
PAUSE/
If the
TV
picture rolls vertically, adjust the
TV
vertrcal
hold
control.
To protect the tape, the Camcorder releases the tape
tension and resumes STOP mode when left longer than 5
minutes in STILL mode during playback.
24
To Next Page
Loading...
Need help?
General
