Sharp VL-C8000X User Manual

COUNTER MEMORY FEATURE
The 4-digit display acts as a handy reference to help you locate specific scenes. Use the tape counter memory
to quickly return to a favourite scene.
When the memory is on, the tape stops when the counter reads “MOOOO” during FF and REW.
1
2
3
4
5
I
I
Slide the OPERATE switch to on. Set the
CAMERA RECNCR PLAY switch to “VCR
PLAY”.
Press the COUNTER/COUNTER MEMORY/
LAP TIME button to display the tape counter in
the viewfinder.
Press the PLAY button to start playback.
(When the Camcorder is in STILL mode, press
the STILL button).
Press the RESET and COUNTER/COUNTER
MEMORY/LAP TIME button at the beginning of
the scene.
Press STOP at the end of the scene and then
press the REW button. The tape will rewind to
roughly “0000” and tape travel will stop.
.The numbers tn the counter will not change smoothly
while fast forwarding or rewinding. However, this is not
an indication of trouble.
l The tape counter will show “0000” and “M” will appear.
l If the COUNTER/COUNTER MEMORY/LAP TIME button is
pressed once more, the counter display will disappear and
the memory feature will not function.
(During the CAMERA REC mode, it is also possible to switch
on the LAP TIME counter by pressing the COUNTER/
COUNTER MEMORY/LAP TIME button.)
l Counter memory feature works only when the CAMERA
RECNCR PLAY switch is in the “VCR PLAY” position.
c
COUNTER
MEMORY
LAP TIME RESET
Viewfinder Indicator
4
25

Sharp VL-C8000X Specifications

General

Brand	Sharp
Model	VL-C8000X
Category	Camcorder
Language	English