Sharp VL-E41X User Manual

-2,9
2
/
\
MENU 1
OFF
DATE+TIME
SET 1
IPAGE
\I /
4
-1, 1.1994
f2'00 AM
\‘/
5
2.-ls1994
12:do‘AM
\\ I! /
6 _
2. 6,i994-
12:oo AW
7
8
9
2. 6.1995
\ 12) 6 Jig?5
-12-:00-AM-
/I\ /I\
2 ..,,6,.1995
lOrOO-AM
/I\
lo:30
AM
SETTING THE DATE AND TIME
Example:
Setting the date to 2 June 1995 (2. 6.1995) and the
time to lo:30 am (IO:30 AM).
I
Notes:
. Check that the memory backup lithium battery has been
installed before setting the date and time
l The date and time, once set, are stored in memory
1
2
3
4
5
6
7
8
9
Set the Operate switch to CAMERA.
Press the MENU button to display MENU 1.
If MENU 2 is displayed, press the PAGE button
(@) to get MENU 1 on the screen.
Press the ‘I or A button to move the ) pointer
to “SETTING”, and then press the SET button.
l When the memory backup is not operating, e.g when
the VIEWCAM is first received from the factory, the
pointer automatically points at this item.
Press the v or A button to select “2.” (day),
and press the SET button.
Press the V or A button to select “6.” (month),
and press the SET button.
Press the V or A button to select “1995”
(year), and press the SET button.
Press the V or A button to select “IO AM”
(hour), and press the SET button.
Press the V or A button to select “30” (min-
utes), and press the SET button.
The date and time settings are now complete.
Press the MENU button, and the menu will disap-
pear from the monitor screen.
Notes:
l The menu display is automatically cancelled if no settings
are made within approximately 5 minutes after the MENU
button is pressed.
l The internal clock starts operating when the SET button IS
pressed in step 8 above.
15

Sharp VL-E41X Specifications

General

Brand	Sharp
Model	VL-E41X
Category	Camcorder
Language	English