Sharp VL-E41X

REC START/STOP button
USING THE HAND STRAP
Fitting the Grip Strap to Your Hand
Hold the VIEWCAM towards your chest, and pull the
strap down until the velcro patches open. Then put
your thumb on the REC START/STOP button, pull the
strap tight until it fits snugly, and seal the velcro clo-
sures
Caution:
l Do not swing the VIEWCAM by its hand strap.
HANDLING OF THE LCD MONITOR
l Do not let anything press against the monitor
screen, and do not expose it to shock, as it may
break.
*Do not put the VIEWCAM on a table, or any other
surface, with the monitor screen facing down.
l Use the provided cleaning cloth or other soft cloth
to clean the screen.
*The image may become blurred when the screen
or areas adjacent to the screen are pressed.
17