Sharp VL-E41X User Manual

WARNING: -
This Camcorder must be supplied with D.C. 6.0 volts only from a BT-77, BT-70, BT-BH70,
BT-80, or BT-BH85 battery, the AC adaptor (UADP-0179GEZZ) or the optional VR-PlOOCH
car adaptor.
CAUTION:
As there are no user-serviceable parts inside the Camcorder or AC adaptor, do NOT re-
move their cabinets as touching parts inside could result in electric shock. Please refer
servicing to a qualified dealer or a Camcorder service centre approved by Sharp.
This VIEWCAM does not have a PCM recording or playback function. PCM recording made
using other VCRs or audio dubbing cannot be played back on this unit.
Your VIEWCAM is designed to record in SP mode only. It will not perform normal playback for
programmes prerecorded in LP mode.
If you record on a tape on which PCM sound has already been recorded, the audio track of the
new VIEWCAM recording may not come out when the tape is played back on a PCM-capable
VCR. If this occurs, set the VCR’s audio monitor select switch to the “Normal” position.
NOTE
This VIEWCAM is a high technology product.
The LCD Panel comprises 89622 TFT Transistors. Due to the high density of transistors, it is
possible that some pixels may fail.

Sharp VL-E41X Specifications

General

Brand	Sharp
Model	VL-E41X
Category	Camcorder
Language	English