Sharp XE-A107 - Installing Batteries; Installing a Paper Roll


2. Open the battery cover next to the paper roll cradle.
3. Install three new LR6 (“AA” size) batteries.
NOTE
 Besurethatthepositive(+)andnegative(-)polesof
eachbatteryarefacingintheproperdirectionfor
installation.
4. Confirm the no battery symbol “ ” lights off.
5. Close the battery cover.
6. Replace the printer cover.
Be careful with the paper cutter, so as not to cut yourself.
 
For the printer, you must install the paper roll provided with the register, even when you program the
register for not printing receipt.
1. Remove the printer cover.
 

2. Open the paper guide.
Set a paper roll in the paper roll cradle.
3. Insert the paper straight into the paper inlet, and press
F
.
The paper then feeds through and appears in the print area.
4. Close the paper guide.