Before starting programming, set the mode switch to the Z/PGM mode. Also
if necessary, enter the secret code and press
A
.
•Youcancontinueprogrammingwithoutprintingtheprogramming
reportbynotpressing
u
attheendofeachprogramstep.
However,youmustprogramPLUsindependentfromotherprogramming.
•
Unlessotherwisespecified,programmingoptionsmarkedwith*indicatefactorysetting.In
caseofvaluesornumbersettings,thefactorysettingsareshownwiththeword,“Default”.
Unit prices can be assigned directly to department keys for frequently purchased items, which
enables you to enter the prices by simply pressing the department keys. (Default: 0.00)
For dept. 5 through 8
To program zero
To program another department
Dept. key
u
H
Unit price
(max. 5 digits)
The PLU function allow speedy key entries whereby a preset price is automatically called up when a
code is entered. Up to 80 PLU settings are possible. Each PLU should belong to a department in
order to acquire the parameters of the department. The cash register was factory preset so that
PLU1 to 10 are assigned to department 1 and unit price 0.00.
To program zero
PLU code
Unit price
(max. 6 digits)
(1 - 80)
To program the following PLU code
To program another PLU code
p
u
H
For dept. 5 through 8
Associated
Dept. key
To disable a PLU, enter the PLU code and press
p
, then press
v
and
u
.
To Next Page
Loading...
