Operations Manual Perdix
Manual DocRev B
15
Stop at 90ft for 2 min
Alert - depth is shallower
than the 90ft stop depth
Stop Depth and Time
Stop – The next decompression stop depth in the current units (feet or meters).
This is the shallowest depth to which you can ascend.
Time – The time in minutes to hold the stop.
By default the Perdix uses a 10ft (3m) last stop depth. At this
setting, you may perform the last stop at 20ft (6m) with no
penalty. The only difference is that the predicted time-to-surface
will be shorter than the actual TTS since off-gasing is occurring
slower than expected.
There is also an option to set the last stop to 20ft (6m) if you wish.
Will Flash Red if you ascend shallower than the current stop.
To Next Page
Loading...
