Operations Manual Perdix
Manual DocRev B
9
BUNGEE CORD
Bungee cord can be installed in many ways based on your preference. Two
examples are shown. The holes are sized for 3/16” (4.8 mm) diameter cord.
A simple overhand knot (at left)
works well to secure the bungee
cord.
However, this knot can pull
through the mounting holes
under very high load.
We find that the knot shown on
the right works well.
This knot has the nice feature
of creating loops that stay wide
open while putting the Perdix on
your wrist.
1
2
3
4
Allergy Alert! The supplied elastic surgical tubing
contains LATEX.
Tip: Use two pieces of cord
When using the bungee cord, always create two independent loops so that a
single break does not result in a lost dive computer. If using a single continuous
piece of cord, isolate the sides with a knot.
To Next Page
Loading...
