Operations Manual Perdix
Manual DocRev B
81
After receiving the new firmware, the Perdix will reset and display a
message stating either firmware update success or failure.
Changing Languages
If you have chosen a language other than English, you will be asked
to select the language you want to use when you start your Perdix the first
time.
If you want to change the language, take out the battery briefly, and the
next time you start your Perdix, you will be asked to select the language.
In Shearwater Desktop, go to Dive Computer Update Firmware
Ensure that you have the latest version of
Shearwater Desktop. You can get it by clicking here
FIRWARE UPDATE USING SHEARWATER DESKTOP
Shearwater Desktop will detect your dive computer once you
start Bluetooth and will automatically select the latest available
firmware.
Select your language, confirm
the update and Shearwater
Desktop will send the firmware
update to your Perdix.
The Perdix screen will give
percentile updates of receiving
the firmware, and then the
Personal Computer will read
“Firmware successfully sent to
the computer” on completion.
To Next Page
Loading...
