Operations Manual Perdix
Manual DocRev B
77
Enter Adv. Config
Reset Adv. Config
System Info
Battery Info
Main Color White
Title Color Cyan
End Dive Delav 060s
Bat Icon Surf + Warn
Gas Select Classic
Advanced configuration contains items that will be used
infrequently and can be ignored by most users. They provide more
detailed configurations.
The first screen allows you to enter the advanced configuration
area, or to set the advanced configurations settings to their default.
Title Colour
The title colors can be changed for added contrast or visual appeal.
Default is Cyan, with gray, white and blue also available.
Main Colour
Main colours can also be changed for added contrast.
Default is white but can be changed to green.
End Dive Delay
Sets the time in seconds to wait after surfacing before ending the
current dive.
This value can be set from 20 seconds to 600 seconds
(10 minutes). Default is 60s.
This value can be set to a longer time if you want brief surface
intervals connected together into one dive. Some instructors use a
longer end dive delay when teaching courses. Alternatively, a shorter
time can be used to exit dive mode more quickly upon surfacing.
Battery Icon
The behavior of the battery icon can be changed here. Options are:
Surf+Warn: The battery icon always displays when on the surface.
During dive it displays only if there is a low battery warning.
Always: The battery icon always displays.
Warn Only: The battery icon only appears when there is a low
battery warning (this is how the Predator operates).
Gas Select
The style of Select Gas menu. Either Classic or New. Classic style
shows one gas at a time in the large font. New style shows all
gases at once, but in the small font.
Advanced Configuration 1
To Next Page
Loading...
