Shearwater Perdix - DIVE LOG MENU; Display Log

Operations Manual Perdix
Manual DocRev B
64
08-Aug-2015
Back
92ft
52ft
5:43pm
6:40pm
57min
DIVE#
Oft
92ft
Avg
Start
End
27
Max
More
DEPTH
TIME
0
Dive Log
.21
GasPO2
SURFACE
2 h 45 m
DEPTH
TIME
0
Next
Display
Display Log
.21
GasPO2
SURFACE
2 h 45 m
DEPTH
TIME
0
Next
Exit
Next Log = 0004
.21
GasPO2
SURFACE
2 h 45 m
Display Log
At the “Display Log” prompt, press SELECT to view the most
recent dive.
The profile of the dive is plotted in blue, with decompression stops
plotted in red. The following information is displayed:
Maximum and Average depth
Dive number
Date (dd/mon/yyyy)
Start - Time of day dive started
End - Time of day dive ended
Length of dive in minutes
Minimum, maximum, and average temperature
Dive mode (OC Tec, CC/BO, etc.)
Surface interval preceding the dive
Recorded Surface Pressure at the beginning of the dive
Deco model and gradient factor settings used
Start and end CNS
Starting and ending tank pressure (Perdix AI only)
Average SAC (Perdix AI only)
Press MENU to see the next dive, or SELECT to quit viewing logs.
Press Back to see the list of dive logs, and next to select the next
dive and View.
Edit Log Number
The dive log number can be edited. This is useful if you want the
Perdix log numbers to match your lifetime dive count.
At the “Next Log” prompt, press SELECT to begin editing. While
editing, use MENU to change the value of the currently underlined
digit, and SELECT to move to the next digit.
This number will be applied to the next dive.
DIVE LOG MENU