Operations Manual Perdix
Manual DocRev B
92
The center row also shows permanent "Low PPO2" or "High PPO2" messages when
the PPO2 is not in a safe range. These message will clear automatically once a safe
PPO2 is restored.
Error Description Solution
Reset to Defaults
Not really an error, just notification that
the reset has been completed.
N/A
New Unlock
Not really an error, just notification that
a new unlock has been applied.
N/A
Upgrade Failed
Firmware update failed, possibly due
to a communications error or corrupted
file.
Try the firmware upgrade again.
Contact Shearwater if problem
persists.
Various other system
level errors
Other messages than those above may
be shown for system level failures.
Please report to Shearwater Research
Inc.
This is not an exhaustive list. Please contact us if you
experience any unexpected errors:
info@shearwater.com
CONTACT SHEARWATER
To Next Page
Loading...
