Shearwater Perdix - Page 94

Operations Manual Perdix
Manual DocRev B
94
STOP
TIME
MISSED DECO
DEPTH
TIME
45 42 50 2
Error
Confirm
1.12
GasPO2
TISSUES CLEARED
DEPTH
TIME
0
Error
Confirm
.21
GasPO2
SURFACE
2 h 45 m
WATCHDOG RESET
DEPTH
TIME
0
Error
Confirm
.21
GasPO2
SURFACE
2 h 45 m
UPGRADE RESET
DEPTH
TIME
0
Error
Confirm
.21
GasPO2
SURFACE
2 h 45 m
Deco
The alarm occurs when the diver has been above the
minimum depth for a decompression stop for more
than one minute. This alarm will only appear once
during a dive, but it will also appear once on the
surface after the dive.
Tissues Cleared
This alarm will show when the decompression
tissues are cleared. All decompression information
has been lost.
Watchdog Reset
This alarm happens when the computer does not
complete all of its tasks in the time allotted. It can
happen occasionally from a transient problem like a
battery bounce after an impact. It can also be the
result of a hardware problem.
Upgrade Reset
This reset shows up after a software update. This is
the normal event that shows the computer has been
rebooted after the software update.