Shelly Wave 1PM - 11.3 AC Mains Disconnected Notification

EN.
27
117), short
press on the S
button, press on
any
switch/push-
button
connected to
any SW (SW,
SW1, SW2, …)
terminal.
Value=0x06,
Version=V3
11.3 AC mains disconnected
Z-Wave
Notification
Type Name
Z-Wave
Notification
Name
LED colour
status
Device
reaction
Action to
restore
Device
specific
Z-Wave
definition
Power
Management
AC mains
disconnected
(valid for AC
and DC power
supply)
Check the
RGB LED
signalization
table
.
Any of the
following
activities reset
this alarm:
power cycle,
Remote
Device reboot
(with
Parameter No.
117), short
press on the S
button, press
on any
switch/push-
button
connected to
any SW (SW,
SW1, SW2, …)
terminal.
YES
notification
type=power
management
Value=0x08,
event=State
Notification
name=AC
mains
disconnected
Value=0x02,
Version=V2