EN.
24
10. Z-Wave™ Command Class
1. ASSOCIATION_V2 [S0, S2]*
2. ASSOCIATION_GRP_INFO_V3 [S0, S2]*
3. BASIC_V2 [S0, S2]*
4. SWITCH_BINARY_V2 [S0, S2]*
5. CONFIGURATION_V4 [S0, S2]*
6. DEVICE_RESET_LOCALLY_V1 [S0, S2]*
7. FIRMWARE_UPDATE_MD_V5 [S0, S2]*
8. INDICATOR_V3 [S0, S2]*
9. MANUFACTURER_SPECIFIC_V2 [S0, S2]*
10. METER_V6 [S0, S2]*
11. MULTI_CHANNEL_ASSOCIATION_V3 [S0, S2]*
12. NOTIFICATION_V8 [S0, S2]*
13. POWERLEVEL_V1 [S0, S2]*
14. SECURITY_V1
15. SECURITY_2_V1
16. SUPERVISION_V1
17. TRANSPORT_SERVICE_V2
18. VERSION_V3 [S0, S2]*
19. ZWAVEPLUS_INFO_V2
*[S2] Security 2 Command Class
This product can be operated in any Z-Wave network with other Z-Wave certified devices from
other manufacturers. All mains operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
ⓘ NOTE: MAPPING OF COMMAND_CLASS_BASIC
Supporting Command Class Basic
COMMAND_CLASS_BASIC is mapped into COMMAND_CLASS_SWITCH_BINARY, for enabling
Switch (O) control:
To Next Page
Loading...
Need help?
General
