Shure Microflex Complete Wireless MXCW - Mount the Networked Charging Station

Shure Incorporated
36/101
•
•
•
Mounting on a Tripod
Use an adapter to bolt the mounting plate to a mic stand or tripod. If a bolt is needed to secure the plate and the adapter, take
note of the bolt size and purchase the corresponding bolt from a local hardware store.
Mount the Networked Charging Station
How to Use Screws for Secure Installation
The screws for attaching the mounting brackets to the charger are provided. Screws for securing the charger to another sur
face must be purchased at a hardware store.
Important: The top of the screw must extend exactly 9/64 (0.149) inches (3.78 mm) above the surface (about 4 ½ threads).
Use the screws that best fit the thickness of the surface.
Use at least 3 screws to secure the mounting brackets to the charger.
Use at least 3 screws on each side to secure the mounting brackets to the rack or wall.