Shure Microflex Complete Wireless MXCW - Digital Audio Networking; Dante Network Audio; Switch Recommendations for Dante Networking

Shure Incorporated
72/101
•
•
•
•
•
•
•
Digital Audio Networking
Dante digital audio is carried over standard Ethernet and operates using standard Internet Protocols. Dante provides low la
tency, tight clock synchronization, and high QualityofService (QoS) to provide reliable audio transport to a variety of Dante de
vices. Dante audio can coexist safely on the same network as IT and control data, or can be configured to use a dedicated net
work.
Dante Network Audio
Connect your Dante audio network to the MXCW system.
Connect a network of devices
10 input channels, useful for:
Dante-enabled microphones, such as Microflex Advance Ceiling and Table Arrays
Output from an automatic mixer or room system
Videoconferencing signal of far-end audio
10 output channels, useful for:
Recording system for archiving
Live-streaming events
Videoconferencing feed of near-end audio
Routing Dante Channels
Use the free Dante Controller software by Audinate to route Dante channels in and out of the MXCW system.
Switch Recommendations for Dante Networking
In addition to the basic networking requirements, Dante audio networks should use a Gigabit network switch or router with the
following features:
Gigabit ports
tm
®
™
®