Shure MXA710 - MXA710 2-Foot and 4-Foot Linear Array Microphone; New in Firmware 6.2; General Description; Features

Shure Incorporated
4/43
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MXA710
2-Foot and 4-Foot Linear Array Microphone
New in Firmware 6.2
Download firmware updates with Shure Update Utility.
For ceiling installations, set a talker height and see more accurate representations of microphone coverage.
Improve automixer gating with the speech gating threshold and remove noise with enhanced noise filtering.
New "automatic" setting options for noise reduction and the AEC's non-linear processing level. Processing adjusts in real
time to changes in the acoustic environment.
General Description
The Shure Microflex Advance MXA710 Linear Array Microphone represents the next evolution in Shure array microphone
technology, designed for high-quality audio capture in premium AV conferencing environments. The linear form factor of the
MXA710 allows for placement virtually anywhere in a meeting space, including on a wall, around a display, on a ceiling, or in a
conference room table. Available in 2- and 4-foot lengths in 3 colors, the MXA710 includes proprietary IntelliMix DSP and Aut
ofocus technology that provides all the processing needed for echo- and noise-free audio.
Features
Steerable Coverage technology to capture audio anywhere in the room (up to 4 lobes with a 2-foot array, 8 lobes with a
4-foot array)
Autofocus technology fine-tunes each lobe position in real time, even if meeting participants lean back or stand up.
Default room coverage template enables quick and easy lobe optimization for wall, ceiling, or table installations.
IntelliMix DSP includes automatic mixing, acoustic echo cancellation, noise reduction, and automatic gain control.
Shure Designer System Configuration software for easy setup and configuration
PoE powered
LED status bars with configurable colors and brightness
Dante & AES67 audio networking protocols
Shure network audio encryption compatible
Multiple mounting accessories available for wall, ceiling, or table installation
MXA710 Designer Setup Example
This example uses Designer 6.0 to set up an MXA710 and an ANIUSB-MATRIX. You can use other combinations of devices
with the MXA710, but the setup process in Designer is similar.
After completing this basic setup process, you should be able to:
Discover the MXA710 in Designer
Design microphone coverage
Apply DSP and route signals
®
™
®
™
™