Shure MXA710 - MXA710 Frequency Response

Shure Incorporated
40/43
Maximum SPL
Relative to 0 dBFS overload
MXA710-2FT 101.4 dB SPL
MXA710-4FT 101.9 dB SPL
Signal-To-Noise Ratio
Ref. 94 dB SPL at 1 kHz
71.2 dB Aweighted
Latency
Does not include Dante latency
Direct Outputs 8.7 ms
Automix output (Includes IntelliMix processing) 19.3 ms
Self Noise
MXA710-2FT 22.9 dB SPLA
MXA710-4FT 22.8 dB SPLA
Dynamic Range
MXA710-2FT 78.5 dB
MXA710-4FT 79.1 dB
Built-in Digital Signal Processing
Automatic mixing, Acoustic Echo Cancellation (AEC), Noise Reduction, Automatic Gain Control, Compres
sor, Delay, Equalizer (4band Parametric) , Mute, Gain ( 140 dB range)
Acoustic Echo Cancellation Tail Length
Up to 250 ms
Networking
Cable Requirements
Cat 5e or higher (shielded cable recommended)
MXA710 Frequency Response
Frequency response measured directly on-axis from a distance of 6 feet (1.83 m).