EasyManua.ls Logo

SICK CLV 422 - Table 6-5: Guide: Settings to be Made for the Evaluation of Identical Bar Codes

SICK CLV 422
146 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions Chapter 6
CLV 42x bar code scanner
Operation
8 009 981/O078/16-08-2004 © SICK AG · Division Auto Ident · Germany · All rights reserved 6-9
d) Parameterizing evaluation characteristics
• Activate code types for evaluation CODE CONFIGURATION tab SYMBOLOGIES section
and
SYMBOLOGY PARAMETERS button
• Activate code comparison DEVICE CONFIGURATION tab CODE COMPARISON section
• Mode for TEACHING IN match code 1 via the "Sensor 2" switching input DEVICE
C
ONFIGURATION tab TEACH-IN section
• Set output time of the reading result DEVICE CONFIGURATION tab READING TRIGGER
P
ARAMETERS button output for GOOD READ section
Separation of identical bar codes (same code type/identical contents)
e) Parameterizing output characteristics
Result status:
• Define function of result status output of "Result 1" and "Result 2" switching outputs
DEVICE CONFIGURATION tab RESULT OUTPUT PARAMETERS button
• Define function of result status output and volume of beeper DEVICE CONFIGURATION
tab RESULT OUTPUT section and READING OUTPUT PARAMETERS button
Main data interface (general):
• Destination of the reading result HOST INTERFACE tab DESTINATION OF RESULT DATA
STRINGS section
• Filter reading result DEVICE CONFIGURATION tab ODETTE FILTER section
• Sort reading result DATA STRINGS tab OUTPUT SEQUENCE SORT section
• Masking of the reading result DATA STRINGS tab FORMAT MASK section
Host Interface:
• Arrangement in the data network DEVICE CONFIGURATION tab ARRANGEMENT section
• Physical interface HOST INTERFACE tab DATA FORMAT section
• Communication parameters HOST INTERFACE tab DATA FORMAT section
• Protocol HOST INTERFACE tab INTERFACE PROTOCOL section
No. of bar codes per object Line/raster scanner
1. Number n = 1 CODE CONFIGURATION tab
CODE POSITION section
– Deactivate COMPARE!
2. Number n > 1:
– Same code type
– Contents different or identical
CODE POSITION section
– Activate COMPARE!
NUMBER OF CODES section
– MINIMUM
– MAXIMUM
3. Number n > 1:
– Code type different
– Contents different or identical
CODE POSITION section
– Deactivate COMPARE!
NUMBER OF CODES section
– MINIMUM
– MAXIMUM
Table 6-5: Guide: settings to be made for the evaluation of identical bar codes

Table of Contents