Object trigger control
If the device is to be operated with an additional read pulse sensor, for example, a pho‐
toelectric sensor on the “Sensor 1” switching input, select the setting “Sensor 1”
(Device tree > Parameters > Object trigger control).
Test and, if necessary, modify the specified settings when operating the system under
real conditions.
COMMISSIONING 7
8014396/ZMG8/2017-07-04 | SICK O P E R A T I N G I N S T R U C T I O N S | CLV69x
87
Subject to change without notice
To Next Page
Loading...
