SICK IDM260 Series

Programming Procedures
Operating Instructions
IDM corded & IDM Bluetooth
28
© SICK AG · Germany · All rights reserved · Subject to change without notice
8017159/2014-04-24
3.2.4 Multiple Scan
Scan one of family
codes
Scan
„PROGRAM“
Scan one or several
option codes
Repeat
selection
Scan
„END“
Yes
No
Enter Programming mode.
Select the desired programming
family.
Select one or several option codes for
the desired parameters.
If it‘s necessary scan „FIN“ to
terminate the option code selection.
Do you want to select another
programming family?
Exit programming mode.