SICK IDM260 Series

Symbology Reading Control
Operating Instructions
IDM corded & IDM Bluetooth
46
© SICK AG · Germany · All rights reserved · Subject to change without notice
8017159/2014-04-24
3.7.4 Code 39/ Code 32
PROGRAM
F_DEFAULT
Family Code Selection P.C. Parameter Selection Option Code
Code 39 Family Setting
SS Disable Code 39 0
SS Enable Code 39  1
SS Select Standard Code 39 as primary format  2
SS Select Full ASCII Code 39 as primary format 3
SS Select Code 32 (PARAF, Italian Pharmaceutical) as
primary format
4
SS Disable start/stop symbol transmission  5
SS Enable start/stop symbol transmission 6
SS Disable Code 32 leading A transmission  7
SS Enable Code 32 leading A transmission 8
SS Disable MOD 43 check digit verification  9
SS Enable MOD 43 check digit verification A
SS Disable check digit transmission  B
SS Enable check digit transmission C
SS Disable Code 39 buffering  D
SS Enable Code 39 buffering E
Trioptic Code 39 Setting
SS Disable Trioptic Code 39  0
SS Enable Trioptic Code 39 1
Code 39 Min. Length
SS Default (01)  FIN
MS 01-98 (2 digits)
Scan 2 digits from the option code chart in the Appendix;
then the scanner will terminate this selection automatically.
Code 39 Max. Length
SS Default (98)  FIN
MS 01-98 (2 digits)
Scan 2 digits from the option code chart in the Appendix;
then the scanner will terminate this selection automatically.
Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously.