& IDM Bluetooth
© SICK AG · Germany · All rights reserved · Subject to change without notice
3.9.3 Reread Delay, Good Read Delay Control
Family Code Selection P.C. Parameter Selection Option Code
Reread Delay
(Double Scan Verification)
SS Disable 0
SS Immediate time out 1
SS Short time out 2
SS Medium time out 3
SS Long time out 4
SS Force verification 5
Good Read Delay
SS None 0
SS 200 msec. 1
SS 500 msec. 2
SS 1 sec. 3
SS 1.5 sec. 4
SS 2 sec. 5
SS 3 sec. 6
The Reread Delay (Double Scan Verification)
This function is designed to inhibit the Hand-held scanner from reading the same bar code label twice in pre-
defined short duration. Force Verification will not allow the reading of the same bar code twice.
IDM1x0: The Reread Delay function is only available when using the Hands-free stand.
IDM2x0: The Reread Delay function is only available in Multiple Read mode or when using the Hands-
free stand.
Good Read Delay
This Good Read Delay is the minimum amount of time before the Hand-held scanner can read another
barcode.
To Next Page
Loading...
Need help?
General
