SICK IDM260 Series

Operating Instructions
Symbology Reading Control
IDM corded
& IDM Bluetooth
8017159/2014-04-24
© SICK AG · Germany · All rights reserved · Subject to change without notice
63
3.7.17 Telepen
PROGRAM
F_DEFAULT
Family Code Selection P.C. Parameter Selection Option Code
Telepen Settings
SS Disable Telepen  0
SS Enable Telepen 1
SS Select Telepen Numeric mode  2
SS Select Telepen Full ASCII mode 3
SS Disable check digit transmission  4
SS Enable check digit transmission 5
Telepen Min. Length
SS Default (04)  FIN
MS 01-98 (2 digits)
Scan 2 digits from the option code chart in the Appendix;
then the scanner will terminate this selection automatically.
Telepen Max. Length
SS Default (98)  FIN
MS 01-98 (2 digits)
Scan 2 digits from the option code chart in the Appendix;
then the scanner will terminate this selection automatically.