SICK IDM260 Series

Symbology Reading Control
Operating Instructions
IDM corded & IDM Bluetooth
56
© SICK AG · Germany · All rights reserved · Subject to change without notice
8017159/2014-04-24
3.7.11 Code 25 Family
PROGRAM
F_DEFAULT
Family Code Selection P.C. Parameter Selection Option Code
Code 25 Settings
SS Disable Standard/Industrial 2 of 5  0
SS Enable Standard/Industrial 2 of 5 1
SS Disable Matrix 2 of 5  2
SS Enable Matrix 2 of 5 3
SS Disable China Postal Code  4
SS Enable China Postal Code 5
SS Disable check digit verification  6
SS Enable check digit verification 7
SS Disable check digit transmission  8
SS Enable check digit transmission 9
Code 25 Family Min.
Length
SS Default (04)  FIN
MS 01-98 (2 digits)
Scan 2 digits from the option code chart in the Appendix;
then the scanner will terminate this selection automatically.
Code 25 Family Max.
Length
SS Default (98)  FIN
MS 01-98 (2 digits)
Scan 2 digits from the option code chart in the Appendix;
then the scanner will terminate this selection automatically.
For Code25 setting, we recommend you to select only one type of Code 25 or set the
maximum/minimum bar code length. To decode all types of Code 25 or to variable length of Code 25
will increase the possibility of reading error.