SICK LMS5 Series User Manual

For your safety
10 © SICK AG · Germany · All rights reserved · Subject to change without notice 8013796/ZM63/2017-05-09
Operating Instructions
LMS5xx Laser Measurement Sensors
Chapter 2
 Use by untrained personnel
 Unauthorized conversions
 Technical modifications
 Use of unauthorized spare parts, consumables and accessories
With special variants, where optional extras have been ordered, or owing to the latest
technical changes, the actual scope of delivery may vary from the features and illustrations
shown here.
2.5 Modifications and conversions
Modifications and conversions to the LMS5xx and/or the installation may result in
unforeseeable dangers.
In case of any other usage as well as in case of modifications to the LMS5xx, e.g. due to
opening the housing and/or breaking the seals during mounting and electrical installation,
or to the SICK software, any claims against SICK AG under the warranty will be rendered
void.
Before any technical modifications to and expansions of the LMS5xx, the prior written
approval of the manufacturer must be obtained.
2.6 Requirements for skilled persons and operating personnel
Risk of injury due to insufficient training!
Improper handling may result in considerable personal injury and material damage.
 All work must only ever be carried out by the stipulated persons.
These operating instructions list the training requirements for the various fields of activity,
as follows:
 Instructed personnel have been given a briefing by the operator about the tasks
assigned to them and about potential dangers arising from improper action.
 Skilled personnel have the specialist training, skills, and experience, as well as
knowledge of the relevant regulations, to be able to perform tasks delegated to them
and to detect any potential dangers independently.
 Electricians have the specialist training, skills, and experience, as well as knowledge of
the relevant standards and provisions to be able to carry out work on electrical systems
and to detect any potential dangers independently. In Germany, electricians must meet
the specifications of the BGV A3 Work Safety Regulations (e. g. Master Electrician).
Other relevant regulations applicable in other countries must be observed.

SICK LMS5 Series Specifications

General

Brand	SICK
Model	LMS5 Series
Category	Accessories
Language	English