SICK MITSUBISHI ELECTRIC MELSEC iQ-F Series - Page 146

144
APPX
Appendix 5 Buffer Memory
Input terminal errors
The input terminal status is stored. A value to be stored is as follows.
■Buffer memory address
The buffer memory address of this area is as follows.
■List of input terminal errors
FX5-SF-MU4T5
FX5-SF-8DI4
Error code 1
The code of an error occurred in a module is stored. For error codes to be stored, refer to the following section.
Page 123 List of Error Codes
■Buffer memory address
The buffer memory address of this area is as follows.
Buffer memory name Address
1st Module Input terminal error 104
2nd Module Input terminal error 144
3rd Module Input terminal error 184
Bit Input terminal of FX5-SF-
MU4T5
Operation
b0 Input terminals I0/I1 00: No error
01: Synchronization time/concurrence error
10: Process error
11: Cross-circuit error
b1
b2 Input terminals I2/I3
b3
b4 
b5 Input terminal X0 0: Open circuit connected to X terminal not detected
1: Open circuit connected to X terminal detected
b6 Input terminal X1
b7 Input terminal X2
b8 to b15  Fixed to 0
Bit Input terminal of FX5-SF-8DI4 Operation
b0 Input terminals I0/I1 00: No error
01: Synchronization time/concurrence error
10: Process error
11: Cross-circuit error
b1
b2 Input terminals I2/I3
b3
b4 Input terminals I4/I5
b5
b6 Input terminals I6/I7
b7
b8 to b15  Fixed to 0
Buffer memory name Address
1st Module Error code 1 105
2nd Module Error code 1 145
3rd Module Error code 1 185