Function assignment
NOTE
Assign the functions for the digital switching outputs in the device with a configuration
tool, e.g. the configuration software SOPAS ET.
For electrical characteristic data of the two external digital switching outputs, see con‐
nection diagrams for the respective connection modules in these operating instruc‐
tions.
Wiring the digital switching outputs of the device via a connection module:
Connection mod‐
ule
Digital switching outputs Reference
CDB650-204 “RES/OUT 1”
“RES/OUT 2”
see "Wiring the “Result 1” and
“Result 2” digital switching outputs
of the device in the CDB650-204 ",
page 113
External output 1 (“EXT. OUT 1”)
External output 2 (“EXT. OUT 2”)
see "Wiring digital switching outputs
“External output 1” and “External
output 2” of the device in the
CDB650-204", page 114
CDM420-0006 “Result 1”
“Result 2”
see "Wiring digital switching outputs
“Result 1” and “Result 2” of the
device in CDM420-0006", page 126
External output 1 (“Aux Out 1”)
External output 2 (“Aux Out 2”)
see "Wiring digital switching outputs
“External output 1” and “External
output 2” of the device in the
CDM420-0006", page 127
6 ELECTRICAL INSTALLATION
70
O P E R A T I N G I N S T R U C T I O N S | RFU63x, RFU65x 8014335/ZTL9/2018-10-14 | SICK
Subject to change without notice
To Next Page
Loading...
