The goal is for the internal parameter set and the parameter set saved externally to
always be identical.
Removing the memory card from the device:
To safely remove the memory card while the device is running, deactivate the card
using the SOPAS ET configuration software and release it for removal.
NOTICE
Risk of damage to the memory card
►
To safely remove the memory card while the device is in operation:
°
In SOPAS ET under Analysis/SD card, run the Remove SD card command. Wait for
feedback from SOPAS ET.
°
If this command is not accessible, the memory card can also be removed
when there is no power to the device.
3 PRODUCT DESCRIPTION
26
O P E R A T I N G I N S T R U C T I O N S | RFU63x 8027750//2022-12-15 | SICK
Subject to change without notice
To Next Page
Loading...
