What to do if my SICK V2D632R-MXSXB0 has hardware or software faults?
If your SICK Barcode Reader is experiencing issues due to device faults, such as hardware or software malfunctions, it's best to contact SICK Service for assistance.
General| Enclosure rating | IP65 |
|---|---|
| Storage Temperature | -20 °C to +70 °C |
| Housing Material | Aluminum |
| Code types | 1D, 2D |
| Connection type | Ethernet, RS232 |
| Power Supply | 24 V DC |
| Operating Temperature | 0 °C ... +50 °C |
| Light source | LED |
Details the purpose and application of the Lector63x image-based code reader.
Lists prohibited uses and potential dangers of incorrect device operation.
Outlines necessary qualifications for safe device operation and maintenance.
Addresses specific safety measures and potential hazards like LED radiation.
Addresses electrical safety, enclosure rating requirements, and precautions.
Details wiring instructions, data cables, and connection diagrams for interfaces.
Covers pin assignments, connecting modules, and supply voltage.
Illustrates wiring for Ethernet, Serial, CAN, and digital I/O interfaces.
Guides on using SOPAS ET for device configuration, image adjustment, and parameter saving.
Explains manual setup via device buttons and initial commissioning steps.
Covers general faults, LED indicators, system information, and status logs for diagnostics.
Details methods for transferring configuration data when replacing a device.
To Next Page
