Engineering and remote access
3.6 SITOP UPS Manager
SITOP UPS1600 / UPS1100
130 Manual, 04.2017, A5E37775406-8-76
● SW version
● HW product version
The following parameters are displayed:
● Buffer mode
● Remaining buffer time
Note
From the instant in time when the SITOP
UPS1600 is switched over into the buffer mode,
ted buffer time, instead of the expected buffer current, the actually
measured buffer current is used.
● Input voltage
● Load current
● Ready for buffering
Energy storage data and parameters
1. Select "Display > Operating data".
2. The data and parameters of the energy storage device can be found under "Energy
storage".
The following data are displayed:
● Order number
● Serial number
● SW version
The following parameters are displayed:
● Battery capacity
● Battery charge level
● Battery temperature
● Measured charge current
To Next Page
Loading...
