Siemens 6ES7153-1AA03-0XB0 - System Modification During Operation; System Modification in a Non-Redundant System; System Modification in a Redundant System

Functions
8.5 System modification during operation
ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
163
8.5 System modification during operation
System modifications
System modification in RUN is possible with the IM 153-2 in the redundant and in the non-
redundant structure:
• In the redundant system
– with IM 153-2AA02 as of version 05
– with IM 153-2AB01 as of version 04
– with IM 153-2Bx00
– with IM 153-2Bxx1
• In the non-redundant system
– with IM 153-2Bx00
– with IM 153-2Bxx1
8.5.1 System modification in a non-redundant system
A detailed description of this function and its parameterization in non-redundant systems can
be found in the function manual "Modifying the system during operation via CiR
(http://support.automation.siemens.com/WW/view/en/14044916)".
8.5.2 System modification in a redundant system
Configuring with STEP 7 / PCS 7
Information on using this function in the redundant structure can be found in the "S7-400H
automation system, fault-tolerant systems
(http://support.automation.siemens.com/WW/view/en/1186523)" manual and in the online
help for the H-optional package for STEP 7.