Siemens 6ES7153-1AA03-0XB0 - PROFIBUS DPV1 Operation

Commissioning
6.1 PROFIBUS DP
ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
93
6.1.4 PROFIBUS DPV1 operation
The ET 200M fulfils the requirements in accordance with DPV1. If you wish to use the DPV1
functions, then the DP master must of course fulfill the requirements in accordance with
DPV1 (refer to the DP master documentation).
Functions of the PROFIBUS DPV1 slave
The following table shows you the new functions of the PROFIBUS DPV1 slave compared with
a PROFIBUS DPV0 slave:
Table 6- 2 Compare the DPV1 and DPV0 slave
Function
1
DPV0
slave
DPV1
slave
Parameter assignment and configuration with GSD file
2
x
5
x
7
Cyclic data exchange
x
x
Acyclic data traffic
(read / write data record):
• free access to parameters in the field device
• Reparameterization of application process
Class 1 services
(parameter assign-
ment master, e.g.
PLC)
–
x
Class 2 services
(e.g. PD / OP)
x
x
Diagnosis
3
•
Identifier-related diagnostics
x
x
• Module status
x
6
x
8
•
Channel-specific diagnostics
x
6
x
8
Interrupts
• Diagnostic interrupt
-
x
9
•
Process interrupt
–
x
9
• removing / insertion interrupt
–
x
Other functions
• Time synchronization
–
x
10
•
Time stamping
4
–
x
11
• Isochronous
–
x
10