Interrupt, error and system messages
9.1 PROFIBUS DP
ET 200M
210 Operating Instructions, 04/2022, EWA-4NEB7806006-09
Hardware interrupt of digital input modules
Figure 9-17 Structure as of byte x+4 for hardware interrupt (digital inputs)
Removing / insertion interrupt
Bytes x+4 to x+8 show the code of the module that has been inserted or removed. The codes
for the individual modules can be found in the GSD file. You can see whether or not the
module has been inserted or removed from the interrupt type in byte x+1.
Figure 9-18 Structure as of byte x+4 for removing / inserting interrupt
See also
Structure of slave diagnosis (Page 187)
Arrangement of the modules for the function "Change During Operation" and / or
"Redundancy" (Page 45)
To Next Page
Loading...
