Technical Specifications
10.1 Standards and approvals
ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
223
Safety instructions
Personal injury and damage to property can occur
In hazardous areas, personal injury and damage to property may occur if you disconnect
plug-in connections during operation of an ET 200M distributed I/O system.
Always switch off the power to the ET 200M distributed I/O system when disconnecting
plug-in connections in hazardous areas.
Explosion hazard
If you replace components, compliance with Class I, DIV 2 may become invalid.
This device is only suitable for use in Class I, Div. 2, Group A, B, C, D, or in non-hazardous
To Next Page
Loading...
