Technical Specifications
10.1 Standards and approvals
ET 200M
226 Operating Instructions, 04/2022, EWA-4NEB7806006-09
RCM (C-Tick) Declaration of conformity for Australia/New Zealand
The ET 200M distributed I/O device satisfies the requirements of the IEC 61000-6-4 standard.
Concentration of pollutants
The ET 200M distributed I/O device satisfies the requirements of the standard ISA-571.04
serverity level G1;G2;G3.
EN 61131
The ET 200M distributed I/O device fulfills the requirements and criteria of the European
standard EN 61131-2 (Programmable Logic Controllers, Part 2: Equipment requirements and
tests).
PROFIBUS standard
The distributed I/O device ET 200M is based on the IEC 61784-1:2002 Ed1 CP 3/1 standard.
PROFINET standard
The distributed I/O device ET 200M is based on the IEC 61158 standard.
PNO
PNO certificate no.:
To Next Page
Loading...
