88
Smart Infrastructure A6V10393190_h_en_--
2019-09-01
Appendix C: History log
Message Meaning
Fire alarm
Zone # Zone # has triggered an alarm.
Fault
Zone # Zone # is in fault state.
Isolation
Zone # Zone # was disabled.
Fault
Output # Output # is in fault state.
Fault
AUX 24V output Auxiliary 24 V output is in fault state.
Isolation
Output # Fire output # was disabled.
Active
Output # Output # is activated when V1 / V2 is running.
Isolation
Fault dialer 'Fault dialer' outputs were disabled.
Isolation
Alarm dialer 'Alarm dialer' outputs were disabled.
Isolation
Sounder outputs
Sounder outputs were disabled.
Isolation
EVAC sounder NL 'EVAC sounder NL' outputs were disabled.
Fault
Mains power Fault in 230 V (or 110 V) power supply.
Fault
Battery Fault in the battery power supply.
Fault
External PSU Fault in external power supply unit.
Fault
Earth fault Grounding fault.
Fault
Set date & time Date and time was not set.
Input
Input #
Reset Panel has been reset when get signal from input.
Input
Input #
Level 2 access Panel is into access level 2 when get signal from input.
Input
Input #
Alarm and fault dialer isolated
Isolation of the output 'Alarm dialer' and 'Fault dialer' when get signal
from input.
Input
Input #
Manned operation Panel is in 'Manned' mode when get signal from input.
Input
Input #
Alarm dialer fault The output 'Alarm dialer' is in fault state when get signal from input.
Input
Input #
Alarm dialer confirmation received Alarm dialer confirmation received when get signal from input.
Input
Input #
Alert active Panel is in 'Alert' mode when get signal from input.
To Next Page
Loading...
