89
Smart Infrastructure A6V10393190_h_en_--
2019-09-01
Message Meaning
Input
Input #
ACK Panel has been acknowledged from input.
Input
Input #
External PSU fault External PSU fault information received when get signal from input.
ACK Panel has been acknowledged from panel.
Reset Panel has been reset from panel.
Active
EVAC
All sounder outputs have been activated in quiescent mode, by pushing
the button 'SILENCE / RESOUND'.
Active
EVAC sounder NL
Programmed EVAC sounder NL outputs have been activated by
pushing the button 'Start' on EVAC module.
Fault
EVAC Module
With or without EVAC module status is not match with panel’s
configure
Input
Input #
Dependency reset Panel has been reset when get signal from input.
Test
Zone # Zone # is in Test state.
Fault
Input #
Alarm dialer fault
The output 'Alarm dialer' is in fault state when get signal from input.
Input
Input #
SE ACK function Panel has been acknowledged from input.
Fault
Output #
24VDC too low
For output # which is powered by external power, external power
voltage is too low.
To Next Page
Loading...
