Siemens HiPath 4000 - Privacy;security; User password

Step by step
Dialing with Call Charge Assignment
104
Dialing with Call Charge Assign-
ment
You can assign external calls to certain projects.
Prerequisite: Project numbers (1 - 5) are configured for
certain projects and you have an account code (project
code) for the project.
Dialing with project assignment
v Open the service menu Æ page 37.
j Enter a service code between 61 (for project number 1)
and 65 (for project number 5).
j Enter the PIN.
or
v Open the service menu Æ page 37.
Select and confirm the option shown.
Confirm the option shown.
if nec.
Select and confirm PIN2 to PIN5.
j Enter the external phone number.
Then make a call as usual Æ page 40.
PIN / COS?
PIN 1?
PIN 2?
Project assignment is temporary. It is automati-
cally switched off if you have not used your
phone, for example, for five minutes.