Siemens HiPath 4000 - Enhanced phone functions; Answering calls

Making Calls – Convenience Functions
55
Step by step
Making Calls – Convenience
Functions
Answering calls
Answering a call with a headset
Prerequisite: The headset is connected.
o The LED flashes when a call is received.
Press the key shown. Conduct call.
Ending the call:
o Press the key shown. The LED goes out.
Answering a call via a DSS key
Prerequisite: DSS keys are configured on your phone
Æ page 19 and Æ page 89.
T Press the DSS key.
n Speakerphone mode.
or
^ Lift the handset.
Accepting a call for another member of your
team
If a team member does not answer a call within 15 sec-
onds (system-dependant), the remaining team mem-
bers hear an alert tone.
In idle mode
The phone rings. "Call for" is displayed on the phone.
^ T Lift the handset and press the flashing "Pickup" key. You
have now picked up the call.
For information on the meanings of the LED dis-
plays of the DSS keys, see Æ page 19.